Why PETG Gets Stringy: Moisture vs Retraction vs Temperature
PETG stringing is one of the most common problems in FDM printing. A print may look clean on the walls but develop thin hairs between separate features, towers or travel paths. The usual reaction is to increase retraction immediately—but that is not always the right first step. PETG stringing can come from several different sources, especially wet filament, nozzle temperature that is too high, retraction that is not tuned, slow travel moves and excessive material flow. The most efficient troubleshooting method is to identify the likely cause before changing multiple slicer settings. Why PETG Strings More Easily Than PLA PETG usually behaves differently from PLA during travel moves. At printing temperature, molten PETG can remain relatively sticky and prone to oozing from the nozzle. When the print head moves across an open gap, that small amount of material can stretch into a thin strand. This does not necessarily mean anything is wrong with the filament. ...