Why Does TPU Still String After Drying? How to Keep Filament Dry During Long Prints
Why Does TPU Still String After Drying? How to Keep Filament Dry During Long Prints
You dried your TPU filament before printing, but the print still develops stringing, blobs, or rough surfaces. Why?
This is a frustrating problem, especially when printing flexible components that take several hours or even multiple days to complete.
TPU is a hygroscopic material, meaning it can absorb moisture from the surrounding air. Drying may improve print quality, but it does not automatically eliminate every source of stringing.
Moisture, nozzle temperature, retraction, printing speed, and the filament feeding path can all affect the final result.
For long prints, another question becomes important: How do you keep TPU dry after the drying process has finished?
In this guide, we'll explain why TPU can continue stringing after drying, how to troubleshoot the issue, and how print farms can manage flexible filament during extended production runs.
1. Why Does TPU String Even After Drying?
Drying addresses moisture, but stringing can have several different causes.
Stringing occurs when small amounts of molten filament escape from the nozzle during non-printing travel movements.
Flexible materials such as TPU can be particularly challenging because their elastic behavior makes pressure control and retraction more difficult.
Common causes include:
- Moisture remaining inside the filament
- Moisture absorbed again after drying
- Excessive nozzle temperature
- Incorrect retraction settings
- Unstable filament feeding
- Printing too quickly for the material
- Insufficient pressure control during travel movements
If drying improves the print but does not eliminate stringing, the next step is to investigate temperature, retraction, and feeding conditions rather than continuing to dry the same spool indefinitely.
2. How Moisture Affects TPU Printing
Many TPU formulations absorb moisture from the air during storage and handling.
When moisture-containing filament is heated in the printer's hot end, the water can turn into vapor.
Depending on the moisture level and printing conditions, this may contribute to:
- Stringing and unwanted oozing
- Small bubbles during extrusion
- Popping or hissing sounds
- Rough or inconsistent surfaces
- Blobs and extrusion defects
- Reduced print consistency
However, these symptoms are not all exclusive to moisture.
For example, excessive temperature can also increase oozing, while unstable feeding can cause inconsistent extrusion.
Therefore, moisture should be treated as one troubleshooting variable rather than the automatic explanation for every TPU printing defect.
3. How to Tell Moisture Problems From Print Settings
Before changing several slicer settings at once, try to identify the most likely source of the problem.
Signs That Moisture May Be Involved
Moisture becomes a stronger suspect when printing performance deteriorates after extended exposure to humid air.
Possible clues include popping during extrusion, bubbles, and rough surface texture appearing together.
If a properly dried sample produces a noticeably better result under the same printer settings, moisture may have contributed to the problem.
Signs That Settings May Be Responsible
If the filament is appropriately dried but stringing remains consistent from the beginning of the print, investigate:
- Nozzle temperature
- Retraction distance and speed
- Travel movements
- Printing speed
- Filament path resistance
TPU formulations vary, so settings that work well with one brand or hardness may not transfer directly to another.
A Simple Diagnostic Method
- Use a representative sample of correctly prepared TPU.
- Print a small stringing test using a documented baseline profile.
- Record temperature, speed, and retraction settings.
- Adjust only one parameter at a time.
- Compare the resulting prints under similar conditions.
This approach makes it easier to determine whether an improvement was caused by the adjustment you made.
4. Why Long TPU Prints Can Develop Problems Later
Imagine starting a TPU print that will run continuously for two or three days.
The filament is dried before printing and initially produces an acceptable result.
But the remaining spool stays exposed to the surrounding environment during the entire job.
Depending on ambient humidity, the TPU formulation, and the amount of exposed filament, moisture may gradually be absorbed again.
This can change the condition of the filament entering the extruder later in the print.
Drying before printing and protecting the filament during printing are two separate steps.
Drying reduces existing moisture under suitable conditions. Controlled storage and feeding help limit further exposure afterward.
For extended TPU printing, both can be important.
5. How to Keep TPU Dry During Long Prints
There are several practical ways to limit TPU exposure to humid air.
Option 1: Print Directly From a Suitable Filament Dryer
Some purpose-built filament dryers allow the printer to draw filament directly from the drying chamber.
This can be useful when continuous moisture management is necessary during a long print.
However, a heated dryer should be operated within the limits specified for both the filament and spool.
Not every spool material or dryer is suitable for continuous elevated-temperature operation.
Option 2: Use a Sealed Dry Box
A sealed dry box with appropriate desiccant can help reduce moisture exposure while printing.
It may be a practical option when the filament has already been dried.
Remember that a passive dry box mainly helps limit moisture exposure. It is not necessarily capable of removing significant moisture from an already wet spool.
Option 3: Minimize the Exposed Filament Path
Where compatible with your printer, a controlled feeding route can reduce the amount of filament exposed to the surrounding environment.
For flexible materials, the path should also avoid unnecessary friction and sharp bends.
A short, well-constrained filament path is generally helpful for TPU feeding reliability.
Option 4: Monitor the Storage Environment
A humidity sensor can help you monitor the air inside a dry box.
However, the displayed relative humidity is not a direct measurement of moisture inside the filament itself.
Use humidity readings together with proper filament preparation and actual print results.
6. What Temperature Should You Use to Dry TPU 95A?
There is no single drying temperature that should automatically be applied to every TPU 95A filament.
Different manufacturers use different polyurethane formulations, additives, spool materials, and packaging systems.
As a result, drying recommendations may differ significantly between specific products.
Before drying TPU:
- Check the exact filament manufacturer's technical documentation.
- Verify the recommended temperature and drying duration.
- Confirm that the spool can withstand the selected temperature.
- Use suitable, temperature-controlled drying equipment.
- Avoid excessive heating that could deform the spool or filament.
For example, Prusa publishes product-specific drying guidance for its TPU materials. Those settings should not automatically be copied to unrelated TPU formulations.
Read the Prusa Filament Drying Guide.
Important: For NexaForge TPU purchases, confirm the drying specification for the exact selected grade and production source before setting a dryer temperature.
7. How to Reduce TPU Stringing After Drying
If moisture has been addressed but stringing remains, use a systematic troubleshooting process.
Step 1: Optimize Nozzle Temperature
Printing at an unnecessarily high temperature may increase unwanted material flow during travel movements.
Try a small temperature test within the range recommended for the specific TPU formulation.
Lowering temperature too far can create a different problem: poor extrusion or insufficient layer bonding.
Step 2: Adjust Retraction Carefully
TPU behaves differently from rigid PLA or PETG.
Excessive or aggressive retraction may deform flexible filament inside the feeding path and increase the risk of feeding problems.
Start with a manufacturer-supported material profile, then make small, controlled adjustments.
Step 3: Control Print Speed
Some flexible filaments require slower printing than rigid materials because they are more difficult to push consistently through the feeding system.
Use a speed appropriate for the actual TPU formulation, extruder, and printer configuration.
Step 4: Check the Extruder and Filament Path
Inspect the filament route for excessive friction, sharp bends, or unstable feeding.
Direct-drive extruders with short, constrained filament paths are often easier to use with standard flexible TPU.
Step 5: Repeat the Test
Use the same test model to verify whether the changes reduce stringing without introducing other defects.
Keep a record of successful settings for future production.
For additional troubleshooting, see:
8. Can TPU 95A Be Used With Bambu Lab AMS?
Standard flexible TPU 95A is generally better fed through a suitable external spool system rather than a conventional AMS configuration.
The flexible filament can be difficult for long automatic feeding and retraction paths.
Some specially formulated, relatively stiff TPU products are designed for specific automatic material systems, but their compatibility should not be assumed for ordinary TPU 95A.
Always check the printer manufacturer's guidance for the exact material and AMS model.
For regular TPU production, consider a short and reliable feeding path, appropriate spool support, and moisture protection during printing.
9. TPU Printing Checklist for Long Production Runs
| Before Printing | What to Check |
|---|---|
| Filament condition | Drying requirements and storage history |
| Drying equipment | Temperature control and spool compatibility |
| Feeding setup | Short, stable, low-friction filament path |
| Nozzle temperature | Appropriate material-specific setting |
| Retraction | Conservative and tested adjustments |
| Print speed | Stable feeding and extrusion |
| Long-print storage | Controlled humidity exposure throughout the job |
For print farms, this checklist can help make TPU processing more repeatable across operators and printers.
10. Choosing TPU Filament for Print Farms and Wholesale Production
For commercial flexible-part production, buyers should consider more than filament price.
Important purchasing factors include:
- TPU hardness and formulation
- Compatible printer and feeding setup
- Moisture sensitivity and storage procedures
- Printing consistency
- Required colors and packaging
- Repeat-order availability
- Supplier documentation and sample testing
For example, TPU 95A and TPU 98A have different hardness ratings and may behave differently during feeding and printing.
The best choice depends on the functional requirements of the printed part and the available printer configuration.
11. Explore NexaForge Engineering and Flexible Filaments
NexaForge supplies 3D printing filament to print farms, resellers, distributors, and wholesale buyers.
Our engineering material range includes TPU, ASA, nylon, PC, and carbon-fiber-reinforced filaments, with different specifications depending on the selected grade.
TPU 95A Flexible Filament
TPU 95A is a flexible material that can be considered for applications such as protective components, grips, flexible prototypes, and impact-absorbing parts.
Printer compatibility, drying instructions, and mechanical performance should be confirmed for the exact material formulation.
View NexaForge TPU 95A Filament →
Explore More Engineering Materials
Looking for TPU 98A or other technical materials?
Our Engineering Filament collection allows buyers to explore material grades, compare specifications, and identify options for their printing applications.
Explore NexaForge Engineering Filaments →
Wholesale and Sample Inquiries
NexaForge welcomes inquiries from print farms and distributors requiring recurring filament supply.
Standard wholesale order quantities generally begin at 100 rolls for the United States, Russia, and Europe, or 250 rolls for Brazil and South America, subject to material availability and quotation terms.
Selected materials and colors may be combined depending on the order configuration.
Factory-direct filament samples are available with the customer covering shipping costs.
Before ordering TPU in volume, we recommend testing a representative sample using the actual printer, drying method, and production settings.
Frequently Asked Questions
Why does my TPU still string after being dried?
Possible causes include remaining moisture, renewed moisture absorption, excessive nozzle temperature, unsuitable retraction, or unstable filament feeding. Check each factor systematically.
Can TPU absorb moisture during a long print?
Yes. Many TPU formulations are hygroscopic. Depending on humidity and exposure time, filament remaining outside the printer can absorb moisture after being dried.
Does a filament dry box prevent TPU stringing?
A suitable dry box can help reduce exposure to humid air. However, it cannot eliminate stringing caused by incorrect temperature, retraction, or other printing conditions.
Should I keep a filament dryer running throughout a long TPU print?
Continuous drying is not always necessary. Use the equipment and operating method recommended for the specific material. Some suitable systems support feeding directly from a controlled drying environment.
What drying temperature should I use for TPU 95A?
Use the confirmed drying specifications for your exact TPU formulation and spool. Different manufacturers publish different conditions, so a universal temperature should not be assumed.
Is TPU 95A compatible with Bambu Lab AMS?
Standard flexible TPU 95A is generally better suited to a compatible external feeding arrangement. Check the requirements of the exact AMS model and filament formulation.
Can NexaForge supply TPU in wholesale quantities?
Yes. NexaForge accepts TPU wholesale inquiries, with final specifications, colors, pricing, quantities, and production lead times confirmed before ordering.
Final Thoughts: Drying Is Only the First Step
TPU stringing can be caused by moisture, but it can also result from printing temperature, retraction, and material feeding behavior.
For long printing jobs, the condition of the filament may change if the spool remains exposed to humid air.
To improve printing consistency:
- Follow material-specific drying instructions.
- Protect TPU from unnecessary moisture exposure.
- Use an appropriate feeding system.
- Optimize nozzle temperature and retraction carefully.
- Validate settings using repeatable test prints.
- Monitor filament and print quality during extended production runs.
The goal is not simply to dry TPU once. It is to maintain suitable filament conditions throughout the printing process.
Looking for TPU or Engineering Filament in Bulk?
NexaForge supports print farms and wholesale buyers sourcing flexible and engineering-grade 3D printing materials.
Contact us with your preferred TPU hardness, colors, quantities, and destination.
Email for quotations:
sales@nexaforge3d.com
WhatsApp for faster communication:
+86 153 0273 6717
Technical References
- Prusa Knowledge Base: Flexible Materials
- Prusa Knowledge Base: Drying Filament
- Prusa Knowledge Base: Stringing and Oozing
- NexaForge: TPU 95A Flexible Filament
Disclaimer: The images in this article use genuine supplier product photographs and printing footage. They do not represent a controlled wet-versus-dry TPU test or demonstrate a verified moisture absorption rate. Drying conditions and compatibility depend on the exact filament formulation, packaging, and equipment. Confirm product-specific specifications before use.
评论
发表评论